1st lesson free
Fabio's profile, diploma and contact details have been verified by our experts
Fabio
- Rate €24
- Response 24h
-
Students7
Number of students Fabio has accompanied since arriving at Superprof
Number of students Fabio has accompanied since arriving at Superprof
€24/h
Contact
1st lesson free
- Engineering
- Mechanical Engineering
Master Your Needs with Expert Guidance – Engineer with 15+ Years of Experience in Teaching Theory and Practice
- Engineering
- Mechanical Engineering
Lesson location
Recommended
Fabio is a respected tutor in our community. He is highly recommended for his commitment and the quality of his lessons. An excellent choice to progress with confidence.
About Fabio
I am an experienced engineer with over 15 years of expertise in teaching, mentoring, and preparing students for school and university exams, university entrance tests, and public or professional competitions. My journey began in 2011 after graduating in Mechanical Engineering, and it has since been strengthened through hundreds of hours of both individual and group lessons, working with up to six students per session. Over the years, I have developed a highly personalised teaching method, tailored to the specific needs of those facing selective assessments—whether a university entrance test (such as TOLC, Medicine, or Engineering), a complex university exam, or a public competition. During my Master’s in Mechanical Engineering, specialising in Energy Conversion Systems, I continued to cultivate my passion for teaching. This passion also led me to China, where I taught Aerodynamics and Thermodynamics to undergraduate Automotive Engineering students at Hubei Automotive University in Shiyan. There, I conducted technical sessions with more than 150 students, covering advanced topics such as Propulsion Systems, Vehicle Performance, and Computational Fluid Dynamics. Today, I put all this experience at the service of those who wish to successfully pass exams, tests, and competitions. My lessons are conducted online and are based on a concrete, strategic approach: starting from an analysis of the syllabus and requirements, we build together a tailored learning path that integrates theory, guided exercises, simulations, and time-management strategies. Whether you are a high school student, a university student, or an adult looking to upskill or pass a competition, we will work together to turn your preparation into real results.
See more
About the lesson
- Transition Year
- Fifth Year
- Sixth Year
- +6
levels :
Transition Year
Fifth Year
Sixth Year
Adult education
Bachelor's degree
Master's degree
Diploma
Doctorate degree
Barrister-at-law degree
- English
- Spanish
- Italian
All languages in which the lesson is available :
English
Spanish
Italian
I offer ONLINE SESSIONS tailored to individual goals and learning styles. Areas of Expertise Physics Mathematics Mechanical Engineering Thermodynamics Fluid Mechanics Heat Transfer Energy Conversion Systems Teaching Techniques & Methodology My approach is highly personalised: I begin with an initial assessment to identify strengths, gaps, and objectives. From there, I design a structured learning plan combining theory, problem-solving, and active discussion. Lessons are interactive, using digital whiteboards, shared materials, and real-world examples. I place strong emphasis on clarity, engagement, and developing both problem-solving skills and exam strategies. Lesson Structure & Length A typical lesson lasts 60–90 minutes, depending on the student’s needs. Sessions usually include: Step-by-step explanation of theory Practical exercises closely aligned with exams/tests Active student involvement through questions and problem reflection Support with assignments, quizzes, or problem sets Exam simulations and strategies for time management Visual aids (schemes, diagrams, PowerPoint slides) for deeper understanding Qualifications & Experience Master’s Degree in Mechanical Engineering, specialisation in Energy Conversion Systems 15+ years of tutoring experience (individual & group lessons, up to 6 students) Former lecturer in Aerodynamics and Thermodynamics at Hubei Automotive University (China), teaching advanced topics such as Propulsion Systems, Vehicle Performance, and Computational Fluid Dynamics to 150+ undergraduate students Extensive experience preparing students for university entrance tests (TOLC, Medicine, Engineering), school/university exams, and public competitions Who My Lessons Are For Middle & high school students (both general and technical tracks) University students in STEM, engineering, medical, and related faculties Adults preparing for public or professional competitions Candidates for university entrance exams and aptitude tests With patience, respect, and a results-oriented methodology, I help students not only understand theory but also develop the confidence and skills to succeed in exams, tests, and real-world applications.
See more
Recommendations
Recommendations come from relatives, friends and acquaintances of the teacher
4
I am a Data Analyst with a degree in Aerospace Engineering. Fabio provided me with excellent tutoring support in my search for international job opportunities, focusing on my sector and professional background. He guided me through interview preparation in English with clarity, precision, and effective strategies to highlight my strengths and experiences.
Fabio was the tutor who helped me prepare for my Physics 1 exam, which focused on kinematics and dynamics. He is highly knowledgeable and has a remarkable ability to break down complex concepts into clear, accessible explanations.
Mr. Bosio is a Mechanical Engineering tutor who supported me throughout my master’s degree. He guided me through several practical projects, offering clear explanations and effective strategies to approach them with confidence. Thanks to his support, I was able to strengthen my skills and achieve steady improvement.
He is highly knowledgeable, patient, and adaptable to the specific needs of each student. I would strongly recommend Mr. Bosio to anyone seeking professional, practical, and targeted support in Mechanical Engineering.
I had the pleasure of taking online lessons with Mr. Bosio to improve my understanding of thermodynamics, and it was a truly positive experience. His clear and straightforward explanations helped me grasp complex concepts that I had previously found difficult. Each lesson was tailored to my needs and included practical exercises that reinforced the theory.
Mr. Bosio was always available to answer my questions, guiding me step by step through problem-solving with patience and precision. This approach allowed me to make rapid progress and gain greater confidence in my studies.
I highly recommend Mr. Bosio to anyone looking for an online thermodynamics tutor: he is professional, knowledgeable, and able to make learning both engaging and effective. Thanks to his experience and his ability to adapt to the students’ needs, I was able to fully master the subject.View more recommendations
See more
Rates
Rate
- €24
Pack prices
- 5h: €119
- 10h: €238
free lessons
The first free lesson with Fabio will allow you to get to know each other and clearly specify your needs for your next lessons.
- 30mins
online
- €24/h
Details
Session rates are tailored to each student’s education level and individual learning needs
Similar Engineering tutors in London
-
![]( "teacher_picture")
Dr khobaib ( highly experienced teacher)
Dublin & Online- Ambassador
Phd in applied sciences, a great mathematician and physicist, can help you in any engineering course.
- €30/h
-
![]( "teacher_picture")
Eduardo
Dublin & Online- Ambassador
Mechanics for engineers (statics, dynamics and mechanics of materials). i am a mechatronics engineer with an msc degree in robotics.
- €50/h
-
![]( "teacher_picture")
Riccardo
Dublin 9 & Online- Ambassador
Lessons of solid mechanics, static, strength of materials, construction science, structural analysis
- €35/h
- 1st lesson free
-
![]( "teacher_picture")
Dr mary (highly professional full-time tutor)
Dublin & Online- Ambassador
Ph.d. holder in engineering with over 16 years of experience teaching all mechanical engineering, civil eng, thermo, mechanics &many more engineering technical courses at all levels& years;flexible pr
- €89/h
-
![]( "teacher_picture")
Bhagesh
Dublin 24 & Online- Confirmed
Electrical engineer | gold medalist | versatile set of technical and analytical skills.
- €40/h
- 1st lesson free
-
![]( "teacher_picture")
Shayan
Dublin & Online- Confirmed
I’m a senior electronic/software engineer with 10+ years of industry experience. learn practical electronics, embedded c and python through real projects and build the skills you need for the industry
- €29/h
- 1st lesson free
-
![]( "teacher_picture")
Irdam
Dublin & Online- Confirmed
Aerospace engineer offering comprehensive tutoring in aeronautics, mechanical engineering, electrical engineering, and complex electronics
- €20/h
- 1st lesson free
-
![]( "teacher_picture")
Kamran ali
Galway & Online- Confirmed
I am doing a phd in civil engineering (structural), expert in designing steel and concrete structures. if any student needs guidance on any topic related to structures, analysis, or designing.
- €25/h
- 1st lesson free
-
![]( "teacher_picture")
Siddhant
Dublin & Online- Confirmed
Cyber security engineer and a working professional who also gives lessons on youtube
- €30/h
- 1st lesson free
-
![]( "teacher_picture")
Chehaji
Cavan & Online- New
Experienced engineer working in a highly regulated manufacturing environment. i offer online support and tutoring in cad, mechanical engineering,, maths, and other technical subjects for undergraduate
- €30/h
- 1st lesson free
-
![]( "teacher_picture")
Ella
Dunleer & Online- Confirmed
Engineering maths and mechanics grinds. 3rd year mechanical engineering student! i can help with any subject or question about your course!
- €25/h
- 1st lesson free
-
![]( "teacher_picture")
Joao
Mullingar & Online- New
Master’s-qualified industrial automation engineer teaches robotics, automation and mechanical design to engineering students online (robotstudio, tia portal, solidworks)
- €25/h
- 1st lesson free
-
![]( "teacher_picture")
Jephson
Balbriggan & Online- Confirmed
Ucd student that teaches leaving cert design communication graphics and junior cert technical graphics in dublin.
- €20/h
- 1st lesson free
-
![]( "teacher_picture")
Brandon
Dublin & Online- New
Student in tud. studying electronic engineering. 2nd year student. tuition: maths, up to leaving certificate), electronics (up to leaving certificate)
- €15/h
- 1st lesson free
-
![]( "teacher_picture")
Robyn
Limerick & Online- New
H1 engineering student. available for engineering grinds for junior certificate and leaving certificate. university of limerick student studying a bachelor of education in graphics, engineering and te
- €20/h
- 1st lesson free
-
![]( "teacher_picture")
Muhammad hani
Cork & Online- New
Phd researcher in engineering sciences with a master's degree in electronics engineering
- €26/h
- 1st lesson free
-
![]( "teacher_picture")
Suhrutha
Dublin & Online- New
Expert aerospace engineering tutoring by experienced assistant professor: elevate your understanding and excel in your studies
- €25/h
- 1st lesson free
-
![]( "teacher_picture")
Mohammadhassan
Carlow & Online- New
Ph.d. student offering university-level tutoring in materials science, including topics such as corrosion, cathodic protection, paints, inhibitors, surface science, thermodynamics, mathematics, indust
- €15/h
- 1st lesson free
-
![]( "teacher_picture")
Muhammad
Limerick & Online- New
Unlock your potential with a phd tutor: mastering electrical engineering and other, and physics; 8 years research & industry experience.
- €25/h
- 1st lesson free
-
![]( "teacher_picture")
Deepak
Limerick & Online- New
Experience mechanical engineering tutor teaching undergraduate students. specialization subjects: mechanics (solid & fluid), cad
- €15/h
- 1st lesson free
-
See Engineering tutors
